Your basket is empty.

Added to Basket

Godox Wireless Power Control Flash Trigger

$88.00SGD

Specification
Product CodeGOD0BDFB99
Condition

Description:

The wireless power control flash trigger FT-16 is designed for versatile use. When used on Godox flashes (with wireless control port), it is not only a flash trigger, but also incorporates multiple functions, such as, adjusting power ratio, controlling the on-or-off of the buzzer and the modeling lamp or the AF-assist beam. The trigger set consists of a transmitter (on camera) and a receiver (on-flash).

 

Features:

 

Power, wireless control flash 16 packets
Remote control lamp and focus lamp, and a buzzer switch
Wireless synchronous flash
Large area of liquid crystal display, clear and easy to understand
Receiver mini light, flash power supply, without battery
50 meters above the maximum sync speed regulation range, 1/250 seconds
Supports two types of power display mode (5.0~10.0 or 1/1~1/128)
Easy to install and use the camera control in hot shoe on demand

Wireless adjusting flash settings:

The trigger set can wireless adjust the following settings: the flash power ratio, the on-or-off of the buzzer and the modeling lamp or the AF-assist beam, as well as the power-ratio display mode.

 

On the transmitter and the receiver, set the channel select switch to the same position and the Power Control Group Select Dial to the same grade.
Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
Adjust the flash settings on your transmitter.

Wireless Triggering the Flash

 

On the transmitter and the receiver, set the Channel Select Switch to the same position
Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
Press the Test Button to fire a flash. Alternatively, you can set the transmitter onto the camera's hot shoe and press the camera's shutter-release button to fire a flash.

 

Technical Specifications:

Transmitter Power Supply 3V (2*AA Ni-MH or alkaline batteries)
Receiver Power Supply 5V (Powered by flashes)
Transmit Frequency 433MHz wireless remote system
Workable Distance 50m/164ft (open areas)
Control on flashes Flash power ratio
Modeling lamp or AF-assist beam on/off
Buzzer on/off
Power-ratio display mode
Flash triggering
Max. Sync Speed 1/250 second
Channel 16
Net weight A set: approx. 85g
Only receiver: approx. 20g
Transmitter Dimension 98*50*37mm
Receiver Dimension 57*30*27mm

Support flash
Witkey series flash, flash upgrade, flash upgrade version of D upgrade, GT series, GS series of Gemini Gemini
Support camera
Canon, Nikon, Pentax, Olympus
Package includes:

1 x FT-16 Transmitter
1 x FT-16 Receiver